By default, once the call has been answered, you simply press the # key on your phone’s keypad to allow entry. You’ll hear a confirmation tone which indicates that the intercom heard your key entry, and has opened the gate/door*. If you wish to deny access, just hang up the call.

*This may vary as sometimes other key tones are used – if nothing happens when # is pressed, please contact your property management/installation company regarding this information.

Our systems are designed to ring your phone of choice once the relevant property button has been pressed on the external unit. You will receive a normal telephone call, and the number that appears on the screen (where applicable) is the unit telephone number and can be stored as “door/gate” for future reference.

Answer the call as normal, and once you have confirmed the identity of the visitor you simply press the # key (by default) and this will trigger the operating equipment. You should hear a confirmation tone confirming this has been accepted and the call will be dropped, or you can simply hang up.

If you do not wish to allow the visitor access, simply hang up the call. If you have multiple entrances that need controlling, you simply enter a different command on your telephone keypad to trigger the alternative equipment.

For more information, a user guide can be downloaded on each product page.

We recommend enabling “Call Waiting” on your phone of choice so you can see the additional call coming through. If not, and your phone features an engaged tone, the Telguard will automatically divert to the next number where applicable.

If voicemail is enabled, the system is unable to divert once this has answered. The visitor can leave a message or cancel the call. Please contact Telguard should you wish to enable “call answer confirmation” to override this. Firmware version dependant.

DTMF Tones – Dual Tone Multi Frequency: This must be enabled on any phone receiving a call from the Telguard system as it generates the tone which triggers the operating equipment. Please check with your phone manufacturer of choice to ensure DTMF tones can be enabled.

CPA – Call Party Answered: If you have a landline based Telguard system, we recommend this setting is enabled in order to ensure calls divert successfully onto subsequent numbers (where applicable). This is usually a free service by your line provider.

CLI – Caller Line Identification: If you have a landline based Telguard system, and you’re using the Authorised Dial-In facility, this must be enabled so incoming numbers can identified. This is usually a chargeable service by your line provider.

The Telguard system can be remotely reconfigured, either by your Installer, or by coming to Telguard directly. Please be advised there may be a charge for this service.

If you wish to submit a programming request, please fill out the form located here.

Once submitted you will receive a response regarding charges if applicable and once the change has been actioned.

The intercom supports mobile phone numbers, landline numbers and international numbers. You can have up to 8 numbers connected, they will be rung in sequence meaning the 1st number will be called and if it fails it will divert to the next number after 10-30 seconds depending on the system configuration*.

*If a voicemail is present on the number that the intercom is dialling it might be worth increasing your voicemail pick up time to allow the intercom to ring you for the full ring time before it diverts. If the intercom reaches a voicemail system before diverting it will not continue to call the other numbers as this will count as the call has been answered.

Unfortunately, we’re unable to provide this information to anyone over the phone unless you’re the property management company or installer. If you live at multiple occupancy site, you can request the entry code from your property/building management company. If you live at a single residency site, you can request this information from your installer.

For single residences, if you are the owner of the property, your installer will be able to assist with this. If you are unsure who your installer is, give our team a call and we will be able to point you in the right direction.

If you are a resident or own a property in a multi-tenanted site, you are unable to make your own changes to the system.

If you are a Managing Agent of a multi-tenanted site, please contact your installation company who will be able to assist. If you are unsure who your installer is, give our team a call and we will be able to point you in the right direction.

If your intercom has been programmed correctly, key in your house/flat number and press call. You should hear ringing and your phone should ring. Occasionally there may be a pause before it starts ringing, the connection speed depends on signal strength and whether the intercom is running on 2G or 4G networks or that the landline connection that the intercom uses isn’t busy being used elsewhere.